LASER SERIES 2000 S/R SIKORA VIETNAM
Giới thiệu
Dòng Laser Series 2000 của Sikora là một hệ thống đo lường tiên tiến, được sử dụng.chủ yếu trong các ngành công nghiệp liên quan đến sản xuất cáp và dây dẫn. Hệ thống này sử dụng công nghệ laser để đo chính xác các kích thước của sản phẩm trong quá trình sản xuất, chẳng hạn như đường kính, độ tròn, và vị trí trung tâm của dây dẫn hoặc cáp.
Độ chính xác cao nhất, độ tin cậy và chức năng liên tục là những tính năng nổi bật của đầu.đo 2 trục và 3 trục của LASER Series 2000 dành cho các sản phẩm đùn có đường kính từ 0,05 đến 300 mm.
Các phiên bản của LASER Series 2000 S/R Sikora
Ưu điểm
* Thời gian phơi sáng cực kỳ ngắn
* Kỹ thuật đo CCD kết hợp với nguồn sáng laser xung
* Xử lý dữ liệu độc lập
* Không có bộ phận chuyển động: Không cần bảo trì và hiệu chuẩn
Mới : LASER LUMP 2000 T hiện đã có thể đo đường kính cũng như phát hiện thêm cục u trong cùng một thiết bị .
Để biết thêm thông tin, vui lòng tải xuống datasheet của chúng tôi hoặc liên hệ trực tiếp với chúng tôi tại support@cablewire-master.com
Thông số kỹ thuật
Nguồn điện:
100 – 240 V AC ± 10 %, 50/60 Hz, 30 VA
Giao diện:
RS485, RS232; tùy chọn giao diện tương tự, Profibus-DP hoặc Profinet IO, hoặc các bus trường công nghiệp như CANopen, EtherNet/IP, DeviceNET, OPC UA
LASER 2050 S/R | LASER 2100 S/R | |
Đường kính sản phẩm | 1,0 – 35 mm (hình quạt), 0,5 – 50 mm (hình tròn) |
1,0 – 35 mm (hình quạt), 1,0 – 100 mm (hình tròn) |
Sự chính xác | ± 20 µm (khu vực), ± 2,5 µm (tròn) |
± 20 µm (khu vực), ± 5,0 µm (tròn) |
Khả năng lặp lại | ± 4,0 µm (hình cung), ± 0,5 µm (hình tròn) |
± 4,0 µm (khu vực), ± 1,0 µm (tròn) |
Thời gian phơi nhiễm | 0,2 µgiây | 0,2 µgiây |
Đo tốc độ | 500/giây/trục | 500/giây/trục |
Kích thước (Rộng x Cao x Sâu) |
435 x 385 x 41mm | 635 x 621 x 93mm |
Đánh giá
Chưa có đánh giá nào.